Workhorse

This industrial series laminator is an ideal laminator for hot and cold laminate jobs both sheet and roll fed...

• Intelligent heat controllers display both the set temperature and the actual temperature. The micro- processor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
• Both upper and lower rollers are mechanically driven. This also prevents roll curling. Other less expensive laminators that cut corners on design may only drive the upper or lower rollers, which creates friction on one side only. This can make the material curl as it is pulled though the laminator.
• Laminating and pull rollers are covered with quality silicone rubber for superior release quality, higher lamination quality and easier cleaning. The laminating rollers and pull rollers are interchangeable.
• Removeable Heat Shoes are teflon coated to reduce film abrasion and are easily unplugged and removed to clean or replace the laminating rollers.
• Dual tension knobs (clutches) for each supply roll mandrel are easy to use and provide as little or as much tension as needed to keep work wrinkle-free.
• Easy access controls are conveniently located and grouped for effective operation.
• A safety guard is built into the feed tray to help insure it will always be in place when laminating.
• Upper and Lower rollers are driven to minimize the wrinkling or curling that can occur when only one roller is driven.
• Standard precision feed tray has both left and right side guides and can be replaced with the power feed tray in seconds.
• Made in the U.S.A.